Public Missiles Ltd.
Rocket Kits

CIRRUS DART 


Dia.: 1.5"
Height: 44"
Weight: 18 oz.
MMT: 38mm

This high velocity, 38mm minimum diameter dart is capable of extremely high altitudes with relatively small motors. Perfect for "H" and "I" class altitude attempts.

The Cirrus Dart is a specialized super-high-performance kit and should only be used by experienced high power fliers.

The Cirrus comes with...

  • Pre-slotted phenolic airframe
  • 8" payload section
  • G-10 fiberglass fins
  • Pre-weighted solid nosecone
  • 7.5" Payload Bay
  • Piston ejection system
  • Ultra-light nylon parachute
  • Pre-cut 6 oz fiberglass reinforcement cloth
  • Explicit instructions

Don`t let its small size fool you, this is NOT a "model" rocket! In fact this rocket can attain higher altitudes than a 4 inch diameter rocket using a "K" motor; and at a small fraction of the cost. Think about it... If recording the highest altitude is your goal, why would you put a 2-ounce altimeter measuring 1.5" x 4" in a 20 pound behemoth to attain a lower altitude? This is not a "Skill Level 1" rocket kit. To keep a high velocity, minimum diameter rocket like this together during flight, several important construction steps must be strictly adhered to. But don`t worry, everything you need (except for adhesives and paint) is supplied with the kit. Very explicit, step-by-step instructions are supplied as well. 20 minute Finish Cure Epoxy will be required in addition to your regular 5 minute epoxy.

Return to PML Rocket Kits
 Return to Magnum Home Page